" "
Whatsapp
The quickest way to check a charger's outdoor honesty is to read its second digit. IP54 means a splash; IP65 means a hose. This wall-mounted unit is the second kind.
The AMPPAL 3.5kW Portable AC EV Charger for Residential Use (AF-AC-3.5-B-A-O-1/2-SF) is a 304 x 191 x 95mm plastic-enclosure wall box with one Type 2 socket, rated 16A on 220VAC single-phase. It connects by Bluetooth, WiFi, and the AMPPAL app, and it carries an IP65 rating with a -30°C to +50°C working range.
We built it for the places a normal charger does not survive: salt air, dust storms, monsoon rain, and the cleaning crew's pressure washer. Salt spray, silica dust, and pressure washers are the three killers; this housing is built around all three.
There is no touch screen to wipe down and no keypad to corrode; the interface is your phone. Removing those parts is deliberate: fewer openings in the enclosure, fewer things for salt air to attack.

Dust-tight is different from dust-resistant: the 6 means no particles get in, even in a quarry or a desert construction site.
Water jets are allowed: you can hose the unit down during cleaning, which is exactly how most outdoor chargers die.
The sealed housing shrugs off condensation-prone climates; the gasket is compressed evenly by the front cover's screw pattern.
The -30°C to +50°C range covers Nordic winters and Gulf summers without a heater or fan.
The plastic enclosure means no rust paths: no bare metal edges, no corroding hinge pins, and a body light enough for one-person installation.
One less thing to fail: no card reader and no keypad mean fewer openings in the enclosure and fewer parts for salt air to attack.
|
Parameter |
Specification |
|
Model |
AF-AC-3.5-B-A-O-1/2-SF |
|
Rated Power |
3.5kW |
|
Input Voltage |
220VAC |
|
Rated Current |
16A |
|
Connectivity |
Bluetooth, WiFi, APP |
|
Dimensions |
304 × 191 × 95 mm |
|
Protection Grade |
IP65 |
|
Operating Temp |
-30°C to +50°C |
|
Certification |
CE Compliance |
|
Warranty |
2 Years Standard |
Coastal homes and cottages where salt spray settles on everything within 500 metres of the water.
Construction site cabins and tool sheds in dusty regions, where fine dust would grind into lesser connectors.
Monsoon climates: the wall mount and downward-facing socket shed water before it can pool.
Farm outbuildings and stables with high humidity and regular washdown routines.
Cold regions where -30°C winters kill cheaper electronics; the unit is rated for the full range.
Temporary and rental setups: lightweight, wall-mounted, and easy to move between sites.
Garage and carport walls where condensation drips all night; the sealed board shrugs off the humidity.
Rental holiday properties where guests are hard on equipment; a unit that survives a hose-down survives most guests.

Water meets the front cover first. The IP65 gasket sits behind the cover and the cable gland seals the entry point; there is no ventilation slot for rain to exploit because the unit is convection-cooled through the enclosure surface.
The Type 2 socket has its own lid. When a car is plugged in, the connector itself carries the weatherproofing; when idle, the lid keeps rain and dust off the contacts.
What IP65 does not mean: submersion. The rating covers jets and rain, not puddles, so mount the unit with the socket angled down and keep the base above flood level. On sites with sideways rain, the recessed socket and low-profile lid give water a longer path before it can reach the contacts.
Cold behavior deserves a line too: the sealed volume breathes little, so moisture is blocked at the joints rather than managed by vents. In extreme freeze-thaw cycles we still recommend mounting under an eave, which costs nothing and removes the last doubt.
Batch samples run IPX5 water-jet testing per IEC 60529: a 6.3mm nozzle at 12.5 litres per minute, sprayed from all angles for three minutes.
Dust chamber runs verify no ingress after eight hours per the IP6X procedure.
100% of units pass hi-pot dielectric and ground continuity checks.
Thermal cycling from -30°C to +70°C per IEC 60068, plus 96-hour salt spray on sampled units.
48-hour full-load burn-in with the enclosure sealed, while internal temperature is logged.
RoHS/REACH compliant components under ISO 9001:2015; CE per the Low Voltage and EMC directives.
Every unit's serial number is linked to its test records, so a batch certificate can be traced back to a specific production day.
Molding: the housing is injection-molded with the gasket groove and mounting points designed into the tool.
Gasket seating: the IP65 seal is fitted and checked under backlight for a continuous bead.
PCBA: power board, Bluetooth/WiFi module, and metering are populated on the SMT line.
Protective coating: the mainboard receives a thin conformal coat before final assembly.
Socket and cable gland assembly, torqued to the spec that makes the seal work.
Firmware load and app pairing check.
IP sampling: units from each batch go to the water-jet rig.
Hi-pot, visual QC, and packing; standard orders ship in 15-20 working days.

3.5kW is a slow, steady charge: roughly 15-17km of range per hour for a typical EV, and a full overnight top-up for most commuters. Choose it when the car parks for hours and the circuit is an ordinary 16A socket circuit.
Do not choose it when you need turnaround. A taxi fleet that cycles every two hours needs 7kW or 11kW, and a depot with three-phase service should not be running 3.5kW boxes. This is a home and light-commercial tool, not a throughput machine.
Where it genuinely wins: outdoor exposure decides, not power. If the location is coastal, dusty, or freezing, the IP65 shell justifies itself even at modest output.
Comparing with a 7kW single-phase unit? The 3.5kW draws 16A and the 7kW draws 32A; many older homes and cottages have a 16A circuit but not a 32A one. When the wiring dictates the choice, the 3.5kW avoids a rewire entirely.
IP65 is tested, not assumed: water-jet and dust-chamber results are available per batch.
Local control via Bluetooth and WiFi with the AMPPAL app; no cloud account needed to start a session.
Compact 304 x 191 x 95mm housing and a one-person wall-mount install.
CE certification, 2-year standard warranty, 15-20 working days lead time, MOQ 1 unit.
OEM/ODM: logo, housing color, and app branding customized; exports to 40+ countries since 2014.
Stock-friendly spares: gasket, socket lid, and cable assemblies are the only consumables, so a distributor can hold one small kit and cover the whole installed base.
Each unit ships in a retail-ready carton of roughly 380 x 280 x 170mm, foam-protected, with the wall bracket, screws, and manual; gross weight is about 3kg.
Forty units per pallet in two layers; a 20-foot container holds about 1,500 units and a 40HQ roughly 3,300, so small and large orders both ship economically. Distributors often combine this model with the 7kW and 11kW versions in one container.
Quotes are FOB Ningbo or Shanghai, EXW available; the commercial invoice, packing list, bill of lading, certificate of origin, and CE declaration accompany every shipment.

2-year standard warranty from shipment, covering manufacturing defects including the sealed electronics.
24-hour technical response with video diagnostics.
Spare parts: gasket kits, socket lids, and cable assemblies via DHL/FedEx within 2 working days.
RMA by photos and serial number: replacement or repair is confirmed before you return anything.
The seal is a wear item: replace the gasket if the unit is ever disassembled, and we include a fresh gasket free with every repair order.
Field repair is possible in most cases: the front cover and gasket come off with standard tools, so a damaged lid does not mean a whole new unit.
Wrong: pressure-washing the socket with the lid open. Right: close the socket lid, and cover a plugged connector before hosing.
Wrong: mounting the unit flat so water pools on the top edge. Right: use the bracket's tilt so the face sheds water.
Wrong: drilling a field cable entry through the enclosure. Right: use the factory gland; a field-drilled hole is where water gets in.
Wrong: leaving the unit at floor level in a flood-prone area. Right: mount above the known flood line; IP65 is jet-proof, not dive-proof.
Wrong: ignoring the gasket after years of UV exposure. Right: inspect the seal yearly and replace it if cracked; the kit costs less than the diagnosis.
A cottage owner on the Norwegian coast mounted one beside a boathouse 200 metres from the sea. After two winters of salt spray, the only issue was a stiff socket lid, which he loosened with silicone spray; the electronics never faulted.
A Kenyan construction contractor keeps four units on site cabins in a dusty highland area. The site manager's complaint is the opposite of most: the units are so sealed that dust cannot escape either, and a thin film collects behind the screen bezel on sunny days.
A Chilean mining camp ordered a batch for staff housing at altitude. Their electrical foreman appreciated the -30°C rating after a night at -18°C; he had previously watched cheaper chargers fail below -10°C.
The common thread in these reports: nobody calls about water damage. The complaints are cosmetic, a stiff lid or a faded bezel, which is exactly what a weatherproof design should cost the owner.
A: Yes, IP65 protects against low-pressure jets from any direction; keep the socket lid closed while hosing.
A: The second digit: 4 resists splashes, 5 resists jets; the first digit 6 adds dust-tightness.
A: It is rated to -30°C; the car's battery management decides how much power it accepts when cold.
A: The housing is UV-stabilized, but expect minor surface fading after several years outdoors.
A: Bluetooth pairing, start/stop, and live power display work locally; WiFi adds remote access once configured.
A: One Type 2 socket with a fixed cable; CCS and CHAdeMO are not offered on AC models.
A: Yes, the IP65 shell works anywhere; indoor use just leaves headroom unused.
A: 15-20 working days for standard models, MOQ 1 unit.
Address
No. 237, Weisan Road, Yueqing, Zhejiang, China
Tel
Talk Directly to Our EV Charger Factory
Get factory-direct pricing, custom solutions, and expert support.
- Fast Response – Reply within 24 hours.
- OEM/ODM – Flexible customization and sample orders.
- Certified Quality – CE, TÜV, CB, and CCC options.
- Custom Quotes – Tailored to your specifications.
- Technical Support – Expert help with OCPP, DLB, and system integration.